רשת
| Network Interface | (5) 10/100/1000 Base-T |
תכונות
| Input Terminals | (2) Door exit request (1) Door position (1) Emergency |
| Dry Output Relay | Lock: 30V DC, 1A Aux: 30V DC, 1A |
| NFC Read Range | < 30 mm (1.18'') |
| NFC Frequency | 13.56 MHz |
| NFC Technology | ISO/IEC 14443A / 14443B / 15693 / 18092 (Ecma 340) MIFARE Classic / MIFARE DESFIRE Sony FeliCa™ (ID only) NFC Forum tags T1T, T2T, T3T, T4T and T5T |
| Door position | (1) Emergency |
| 18 UACC-Cable-DoorLockRelay length 80 m (262 ft) | UA-Lock-Magnetic-270kg (800mA) |
| NFC Card & Keyfob Access | Yes |
| Mobile Unlock | Yes |
מארז והתקנה
| Mount Material | Polycarbonate |
| Mounting | DIN-rail (Included) |
סביבת עבודה
| Operating Temperature | 0 to 40° C (32 to 104° F) |
| Ambient Operating Humidity | 5 to 95% noncondensing |
| Weatherproofing | IP55 |
| Indoor and Outdoor Use | Yes |
| ניהול
| Management Application | UniFi Access |
חשמל ו-PoE
| Power Input | PoE++ UL 294 Power-limited Class 2 PSU UL 60950-1/62368-1 LPS/PS2 PSU |
| PoE Interface | (1) PoE++ input, 50V DC, 1A (4) PoE outputs, 50V DC, 30W per port (Max 45W aggregated) |
| Max. Power Consumption | 30W (Without PoE output) 50W (With PoE output) |
| Powered Output Relay | Lock: 12V DC, 1A Aux: 12V DC, 0.33A 12V DC, 0.33A |
| PoE Cabling Requirements | Cat 5e cabling is the minimum performance category recommended. The performance category utilized should match the transmission speed required at the installation site. The minimal conductor gauge permitted to connect between the PSE or power injector and the PD shall be 26 AWG (0.13 mm² ) for patch cords; 24 AWG (0.21 mm² ) for horizontal or riser cable. |
| Supported Voltage Range | 48V DC |
| PoE++ | UL 294 Power-limited Class 2 PSU |
| PoE outputs, 50V DC, 30W per port | (Max 45W aggregated) |
| Standby power Level I | UL 294 Statement |
| PoE | UL 294 Power-limited Class 2 PSU |
מידות ומשקל
| Dimensions | 174. 9x126 x32.9 mm (6. 9x5 x1.3") |
| Weight | 363 g (12.8 oz) |
תקינה ורישוי
| UL 294 Level | Destructive attack: Level I Line security: Level I Endurance: Level I Standby power: Level I |
| UL 294 Statement | Compliance with IEEE 802.3 (at or af) specifications was not verified as part of UL 294. The equipment is intended to comply with the section of the National Electrical Code, ANSI/NFPA 70, Article 725.121, Power Sources for Class 2 and Class 3 Circuits. |
| Certifications | CE, FCC, IC, UL 294, CAN/ULC-60839-11-1 |
| Compliance with IEEE 802.3 (at or af) specifications was not verified as part of UL 294. | The equipment is intended to comply with the section of the National Electrical Code, ANSI/NFPA 70, Article 725.121, Power Sources for Class 2 and Class 3 Circuits. |
| NDAA Compliant | Yes |
| Compliance with IEEE 802.3 specifications was not verified as part of UL 294. | The equipment is intended to comply with the section of the National Electrical Code, ANSI/NFPA 70, Article 725.121, Power Sources for Class 2 and Class 3 Circuits. |
|
