Ubiquiti USW-Enterprise-48-PoE - UniFi Switch Enterprise 48 PoE
UniFi Switch Enterprise 48 PoE הוא מתג 2.5Gigabit L3 אמין הניתן לניהול עם קיבולת מיתוג של 320Gbps
48 יציאות 2.5Gigabit LAN וארבעה חריצי SFP+ (10 Gbps). כל יציאות ה-Ethernet תומכות ב-802.3af/at PoE-Out עם הספק יציאה של 30 W/port
ותקציב PoE כולל של 720W . בנוסף לציוד הסטנדרטי, למתג יש גם מסך מגע בגודל 1.3 אינץ' למתן מידע על מערכת, טמפרטורה, סטטיסטיקות יציאות,
אספקת כוח PoE ועוד הרבה יותר ניתן להפעיל את המתג באמצעות 230 V סטנדרטי אך גם באמצעות UniFi SmartPower RPS, שמגבה את החשמל במקרה
של הפסקת חשמל פנימית.




Product description
UniFi Switch Enterprise 48 PoE is a reliable manageable 2.5-Gigabit L3 Switch with a switching capacity of 320 Gbps, (48) 2.5-Gigabit LAN ports
and four SFP+ (10 Gbps) slots. All Ethernet ports support 802.3af/at PoE-Out with an output power of 30 W/port and a total PoE budget of 720 W.
In addition to the standard equipment, the switch also has a 1.3" touch screen for providing information about the system, temperature, port statistics,
PoE power supply and much more. The switch can be powered via standard 230 V but also via UniFi SmartPower RPS, which rather backs up power in the
event of an internal power failure.
Key Features
- (48) 100M/1G/2.5G ports - 802.3af/at PoE+ support (30W/port)
- (4) 1/10G SFP+ ports
- 720W Total PoE capacity
- 1.3" touch display
- Backup power via SmartPower RPS connector
- Supported in UniFi Controller from version 6.2.26
Management via UniFi Controller
USW-Enterprise-48-PoE does not have web management but is managed centrally by UniFi Controller with support for the UniFi mobile application
and offers an extensive set of advanced switching protocols and L2 functions, including operating mode (switching, mirroring or aggregation) per port.
UniFi Network Controller and mobile applications allow administrators to configure and monitor virtually all graphical user interface functions from anywhere.
Redundant power
This generation of switches supports redundant power supply via a special connector to the UniFi SmartPower unit in the event of a failure of the primary power supply at the switch.
Package Contents
- Device
- Power cord
- 19" rack mounts
Technical parameters
Connectors and Interfaces
LAN speed : (48) 100M/1G/2.5GOptical interfaces : (4) 1G/10GbpsOther features : TouchscreenPower
Power type : Mains power (230V), UniFi SmartPower RPSPoE type : PoE-Out (only)PoE-Out standards : 802.3af, 802.3atRedundant power supply : YesPoE Out ports : 48PoE budget [W] : 720Max. power consumption [W] : 150Power via connector/terminal : 230V ACPhysical characteristics
Design : RackmountFans : Without fanChassis design : MetalOperating temperature [°C] : -5 up to 40Width [mm] : 442Height [mm] : 44Depth [mm] : 400General
Switchning capacity [Gbps] : 320MAC address table : 16000Jumbo frame [Bytes] : 9000Packet forwarding rate [Mpps] : 238,1Software
Management : UniFi NetworkFeatures : VLAN, DHCP snoopingDefault IP address : 192.168.1.20, Dynamic from DHCPDefault login and password : ubnt / ubnt